Cultivation Equipment

The pneumatic seed-drill APE has been designed to work in combination with a power harrow in limited spaces: it is complete with an exclusive system for mounting the hopper on the rear roller (of the power harrow) which makes it possible to limit the height even while the implement is lifted off the ground.

• Electric console to be placed in the tractor cabin:
  – Start and stop of the fan;
  – Start and stop of the distributor;
  – Graduated potentiometer with scale from 1 to 30;
  – Socket 12 V;
  – Direct; 5 m. long cable to the seeder

• Electric fan 12V

• Electric motor 12V for the metering unit

• Roller mounted standard with medium grooves (yellow colour)

• Metering unit with 8 outlets Ø 25mm

• 8 pcs. flexible pipes connected with the mobile broadcasters on the levelling bar: it is possible to change the broadcasting width even in relation to the working width of the power harrow

Multi-purpose flail mower recommended for maintaining fallow land and green areas

The TR36 multi-purpose flail mower allows, thanks to the patented SSA system, to work on grass, woody material, straw, plant residues, bushes and prunings with excellent results. It is also suitable for the maintenance of fallow land and green areas

1.6m - 2.4m Working Widths

150-310HP – Cracker Subsoiler

• Strong Box section chassis Made from Fine Grain Swedish Steel

• HYDRAULIC DEPTH CONTROLLED REAR ROLLER

• Double Spike FRANTER rear roller crumbles soil for level finish

• Shear bolt Leg Protection

• Replaceable Plough share points

• Wear Protection plates on shanks

• Specially Angled Legs for low power consumption

• Penetrates the hardest of ground conditions

The Inversa is ideal for burying stones, clods and crop residuals. It leaves a top layer of soil on the surface making it easier for seeding and seed germination.

110 - 280 HP

• Reverse rotation rotor

• Central Gearbox driven

• 280HP Gearbox

• Adjustable shock-absorbing rock comb

• Special two rows of combs with the possibility of one only (front or rear)

• Levelling rear door combined with adjustable packer roller

• Drive shaft with slip clutch 1000RPM

110-280HP Rotary Hoe – Extra Heavy Duty

• EXTRA Strong chassis Made from Fine Grain Swedish Steel

• Centre drive Gearbox – Stronger – Less moving parts and lower power

• Reduced overall Width close to working width

• Extra support of Rotor – 3 position bearing support (L/H + Centre + R/H)

• All Rotor Support Bearings Lubricated by oil

• Strong Box Section constructed “A” Frame Linkage

• Heavy spring Loaded Rear Tail door

• Depth Adjustable Via Rear Roller (select option of rear rollers)

• P.T.O Drive shaft with Slip Clutch

• “L” Blades for good chopping action and plant residue incorporation

75-160HP Rotary Hoe

• Strong box selection chassis made from fine grain Swedish steel

• Centre drive gearbox – stronger – less moving parts and lower power

• Reduced overall width close to working width

• Extra support of rotor – 3 position bearing support (L/H + Centre + R/H)

• Strong box selection constructed “A” frame linkage

• Heavy spring loaded rear tail roller

• Depth adjustable side skids – Standard (Option of rear roller)

• P.T.O drive shaft with slip clutch

• “L” blades for good chopping action and plant residue incorporation

50-100HP Rotary Hoe

• Strong box selection chassis made by fine grain Swedish steel

• Centre drive gearbox – stronger-less moving parts and lower power

• Reduced overall width close to working width

• Extra support of rotor – 3 position bearing support (L/H + Centre + RH)

• Strong box selection constructed “A” frame linkage

• Heavy spring loaded rear tail door

• Depth adjustable side skids – standard (option of rear roller)

• P.T.O Drive shaft and slip clutch

• “L” angled blades with sweep back for less power

The Rotodent DmaX is a folding power harrow unique in its category. Its strong point is the TWIN-FORCE “maX” mechanical peculiarity and its heavy-duty structure.

5.0m - 8.0m Working Widths

• 1000 Rpm central drive /min.

• Linkage cat.3 + 4, oscillating and 4 USA ( for DmaX-800)

• Central track eraser

• Supporting legs

• Leveling board on the roller. Independently adjustable

• Multispeed lateral gearboxes, rotor shaft rotating at Z=29/25 (368 rpm) Z=30/24 (396 rpm)

• Central drive shaft 1″3/4 Z=20

• Lateral driveshafts with automatic cam clutch

• Drop-Forged tines (STANDARD + RAPIDO Version)

• Electronic hour-counter

he ROTODENT DKS is a professional folding power harrow thanks to its TWIN-FORCE tine support with tapered roller bearings is particularly suited in combination with seed drills.

4.0m - 6.0m Working Widths

• 1000 rpm gearbox, rotor shaft rotation Z=30/24 (359 g./m.)

• Linkage cat. 3, oscillating

• Movable side plates

• Levelling board on roller. Independently adjustable

• Central track eraser

• Central track eraser 1″3/8 Z=21

• Lateral drive shafts with shear bolt or automatic cam clutch (NOT PROVIDED AS STANDARD)

• Rear light boards

The folding power harrow ROTODENT DJ is made of high-strength steel, offering high structural performances while light in weight.

3.6m - 5m Working Widths

• Strong Chassis made from fine grain Swedish steel

• Round blade supports – for less drag and lower power

• Top and bottom ball bearing rotors for extra rotor shaft support

• Grease nipple on top rotor bearing for long life

• Cast steel stone protection collars fitted standard

• Rear leveling bar with automatic level control and screw adjusters

• Floating lower link mounting and frame with rubber loaded side shields

• Lateral side P.T.O drive shafts with auto cut out cam-clutches

• Standard rotor speed 350 RPM – other speeds available on request

• Special 12mm x 300mm angled blades for less power

• Phased blade timing for lower power and smoother running

• Floating roller mounted on parallelogram with fast depth adjustment

• Narrow 2.5m transport and road lights standard

The ROTODENT RmaX is a rigid power harrow unique in its category. Its strong point is the TWIN-FORCE “maX” mechanical peculiarity and its heavy-duty structure.

2.9m - 4.0m Working Widths

• Extra Heavy Duty – Can work directly into the ground

• QUICK CHANGE BLADES FITTED – STANDARD

• EXTRA Strong chassis Made from Fine Grain Swedish Steel

• Round Blade supports – for less drag and lower power

• “TWIN FORCE” Modular Rotors with TIMKEN TAPER roller bearings

• Double Labyrinth Rotor seal protection 2 YEAR WARRANTY!

• Extra Deep Clearance Rotor Shafts for excellent crop stubble handling

• Rear Levelling Bar with Automatic Level Control and screw adjusters

• Floating lower Link mounting and Spring Loaded side Shields

• P.T.O Drive shaft with Auto Cut out Cam-Clutch

• Standard Rotor speed 343 RPM other speeds/ Gears available on request

• Special angled Blades with sweep back for less power

• Phased Blade timing for lower power and smoother running

• Floating roller mounted on parallelogram with fast depth adjustment

95-200HP Power Harrow

2.9 - 4.0m Working widths

• Strong Box section chassis Made from Special Swedish Steel

• Round Blade supports – for less drag and lower power

• Top and bottom ball bearing rotors for extra rotor shaft support

• Cast steel stone protection collars fitted – standard

• Rear Leveling Bar with Automatic Level Control and screw adjusters

• Floating lower Link mounting

• Spring Loaded side Shields

• P.T.O Drive shaft with Auto Cut out Cam-Clutch – standard

• Selecta speed Gearbox with pick off gears to change rotor speeds

• Stand Rotor speed 343 RPM other speeds/ Gears available on request

• Special angled Blades with sweep back for less power

• Phased Blade timing for lower power and smoother running

• Floating roller mounted on parallelogram with fast depth adjustment

Compact and ideal for use in tight areas such as vineyards, thanks to the design of the side plates, bevelled profiles and compact size.

Alpego power harrows are designed to withstand the toughest conditions, including firm, heavy and stony soils. The high tensile steel frame and high-performing mechanics make it ideal for use with high-power tractors