alpego
Manufactured in Italy. Imported and distributed in New Zealand by Origin Agroup.
Sold and serviced in Southland and Otago by JJ Ltd, proud members of the Origin Agroup.
Cultivators
Multi-purpose flail mower recommended for maintaining fallow land and green areas
The TR36 multi-purpose flail mower allows, thanks to the patented SSA system, to work on grass, woody material, straw, plant residues, bushes and prunings with excellent results. It is also suitable for the maintenance of fallow land and green areas
1.6m - 2.4m Working Widths
200 – 500HP – Mega Cracker
Hydraulic Folding Subsoiler and Cultivator
Strong box section chassis made from fine grain Swedish steel
HYDRAULIC DEPTH controlled rear roller
Double spike FRANTER rear roller crumbles soil for level finish
Shear bolt leg protection
Replaceable quick release plough share points
Rear road lights
Wear protection plates on shanks
Specially angled legs for low power consumption
Penetrates the hardest of ground conditions
150-310HP – Cracker Subsoiler
Strong Box section chassis Made from Fine Grain Swedish Steel
HYDRAULIC DEPTH CONTROLLED REAR ROLLER
Double Spike FRANTER rear roller crumbles soil for level finish
Shear bolt Leg Protection
Replaceable Plough share points
Wear Protection plates on shanks
Specially Angled Legs for low power consumption
Penetrates the hardest of ground conditions
150-220HP – Cracker Subsoiler
Strong Box section chassis Made from Fine Grain Swedish Steel
HYDRAULIC DEPTH CONTROLLED REAR ROLLER
Double Spike FRANTER rear roller crumbles soil for level finish
Shear bolt Leg Protection
Replaceable Plough share points
Wear Protection plates on shanks
Specially Angled Legs for low power consumption
Penetrates the hardest of ground conditions
60-130HP – Cracker Subsoiler
Strong box selection chassis made from fine grain Swedish steel
Manual depth controlled rear roller
Double spike franter rear roller crumbles soil for level finish
shear bolt leg protection
Replaceable share points
Wear protection plates on shanks
Specially angled legs for low power consumption
Penetrates the hardest of ground conditions
Manual depth adjusters on roller for easy depth control
The Inversa is ideal for burying stones, clods and crop residuals. It leaves a top layer of soil on the surface making it easier for seeding and seed germination.
110 - 280 HP
Reverse rotation rotor
Central Gearbox driven
280HP Gearbox
Adjustable shock-absorbing rock comb
Special two rows of combs with the possibility of one only (front or rear)
Levelling rear door combined with adjustable packer roller
Drive shaft with slip clutch 1000RPM
Rotopick Rotary Knife Harrow
Extra heavy duty
110-280HP
Ideal one pass cultivator for seed bed preparation
KNIFE Blades for excellent penetration into hard ground
EXTRA Strong chassis Made from Fine Grain Swedish Steel
Centre drive Gearbox – Stronger – Less moving parts and lower power
No side Drive Reduces overall width close to working width
Extra support of Rotor – 3 position bearing support (L/H + Centre + R/H)
Oil Filled rotor end Bearings
Phased Blade timing for lower power requirement and smoother running
Heavy spring Loaded Rear Tail door
Rear Leveling Bar with Automatic Level Control and screw adjusters
P.T.O Drive shaft with Slip Clutch
85-170HP – Rotopick Rotary Knife Harrow
KNIFE Blades for excellent penetration into hard ground
Strong Box section chassis Made from Fine Grain Swedish Steel
Centre drive Gearbox – Stronger – Less moving parts and lower power
No side Drive Reduces overall width close to working width
Extra support of Rotor – 3 position bearing support (L/H + Centre + R/H)
Strong Box Section constructed “A” Frame Linkage
Heavy spring Loaded Rear Tail door
Phased Blade timing for lower power requirement and smoother running
P.T.O Drive shaft with Slip Clutch
Rear Leveling Bar with Automatic Level Control and screw adjusters
110-280HP Rotary Hoe – Extra Heavy Duty
EXTRA Strong chassis Made from Fine Grain Swedish Steel
Centre drive Gearbox – Stronger – Less moving parts and lower power
Reduced overall Width close to working width
Extra support of Rotor – 3 position bearing support (L/H + Centre + R/H)
All Rotor Support Bearings Lubricated by oil
Strong Box Section constructed “A” Frame Linkage
Heavy spring Loaded Rear Tail door
Depth Adjustable Via Rear Roller (select option of rear rollers)
P.T.O Drive shaft with Slip Clutch
“L” Blades for good chopping action and plant residue incorporation
75-160HP Rotary Hoe
Strong box selection chassis made from fine grain Swedish steel
Centre drive gearbox – stronger – less moving parts and lower power
Reduced overall width close to working width
Extra support of rotor – 3 position bearing support (L/H + Centre + R/H)
Strong box selection constructed “A” frame linkage
Heavy spring loaded rear tail roller
Depth adjustable side skids – Standard (Option of rear roller)
P.T.O drive shaft with slip clutch
“L” blades for good chopping action and plant residue incorporation
50-100HP Rotary Hoe
Strong box selection chassis made by fine grain Swedish steel
Centre drive gearbox – stronger-less moving parts and lower power
Reduced overall width close to working width
Extra support of rotor – 3 position bearing support (L/H + Centre + RH)
Strong box selection constructed “A” frame linkage
Heavy spring loaded rear tail door
Depth adjustable side skids – standard (option of rear roller)
P.T.O Drive shaft and slip clutch
“L” angled blades with sweep back for less power
The Rotodent DmaX is a folding power harrow unique in its category. Its strong point is the TWIN-FORCE “maX” mechanical peculiarity and its heavy-duty structure.
5.0m - 8.0m Working Widths
1000 Rpm central drive /min.
Linkage cat.3 + 4, oscillating and 4 USA ( for DmaX-800)
Central track eraser
Supporting legs
Leveling board on the roller. Independently adjustable
Multispeed lateral gearboxes, rotor shaft rotating at Z=29/25 (368 rpm) Z=30/24 (396 rpm)
Central drive shaft 1″3/4 Z=20
Lateral driveshafts with automatic cam clutch
Drop-Forged tines (STANDARD + RAPIDO Version)
Electronic hour-counter
he ROTODENT DKS is a professional folding power harrow thanks to its TWIN-FORCE tine support with tapered roller bearings is particularly suited in combination with seed drills.
4.0m - 6.0m Working Widths
1000 rpm gearbox, rotor shaft rotation Z=30/24 (359 g./m.)
Linkage cat. 3, oscillating
Movable side plates
Levelling board on roller. Independently adjustable
Central track eraser
Central track eraser 1″3/8 Z=21
Lateral drive shafts with shear bolt or automatic cam clutch (NOT PROVIDED AS STANDARD)
Rear light boards
The folding power harrow ROTODENT DJ is made of high-strength steel, offering high structural performances while light in weight.
3.6m - 5m Working Widths
Strong Chassis made from fine grain Swedish steel
Round blade supports – for less drag and lower power
Top and bottom ball bearing rotors for extra rotor shaft support
Grease nipple on top rotor bearing for long life
Cast steel stone protection collars fitted standard
Rear leveling bar with automatic level control and screw adjusters
Floating lower link mounting and frame with rubber loaded side shields
Lateral side P.T.O drive shafts with auto cut out cam-clutches
Standard rotor speed 350 RPM – other speeds available on request
Special 12mm x 300mm angled blades for less power
Phased blade timing for lower power and smoother running
Floating roller mounted on parallelogram with fast depth adjustment
Narrow 2.5m transport and road lights standard
The ROTODENT RmaX is a rigid power harrow unique in its category. Its strong point is the TWIN-FORCE “maX” mechanical peculiarity and its heavy-duty structure.
2.9m - 4.0m Working Widths
Extra Heavy Duty – Can work directly into the ground
QUICK CHANGE BLADES FITTED – STANDARD
EXTRA Strong chassis Made from Fine Grain Swedish Steel
Round Blade supports – for less drag and lower power
“TWIN FORCE” Modular Rotors with TIMKEN TAPER roller bearings
Double Labyrinth Rotor seal protection 2 YEAR WARRANTY!
Extra Deep Clearance Rotor Shafts for excellent crop stubble handling
Rear Levelling Bar with Automatic Level Control and screw adjusters
Floating lower Link mounting and Spring Loaded side Shields
P.T.O Drive shaft with Auto Cut out Cam-Clutch
Standard Rotor speed 343 RPM other speeds/ Gears available on request
Special angled Blades with sweep back for less power
Phased Blade timing for lower power and smoother running
Floating roller mounted on parallelogram with fast depth adjustment
95-200HP Power Harrow
2.9 - 4.0m Working widths
Strong Box section chassis Made from Special Swedish Steel
Round Blade supports – for less drag and lower power
Top and bottom ball bearing rotors for extra rotor shaft support
Cast steel stone protection collars fitted – standard
Rear Leveling Bar with Automatic Level Control and screw adjusters
Floating lower Link mounting
Spring Loaded side Shields
P.T.O Drive shaft with Auto Cut out Cam-Clutch – standard
Selecta speed Gearbox with pick off gears to change rotor speeds
Stand Rotor speed 343 RPM other speeds/ Gears available on request
Special angled Blades with sweep back for less power
Phased Blade timing for lower power and smoother running
Floating roller mounted on parallelogram with fast depth adjustment
Compact and ideal for use in tight areas such as vineyards, thanks to the design of the side plates, bevelled profiles and compact size.
Alpego power harrows are designed to withstand the toughest conditions, including firm, heavy and stony soils. The high tensile steel frame and high-performing mechanics make it ideal for use with high-power tractors
MUlchers
2.8m – 3.2m working width
80-160HP Heavy Duty Mulchers
High body clearance and large rotor for heavy working conditions
Rear opening adjustable hood – for discharge in heavy conditions
Ideal for mulching – Straw – Maize – Grass – etc
Straw deflector vanes – fitted standard
Free wheel clutch inside oil filled gear box – 540 RPM
Quality 5x cog belt drive for maximum power transfer
Hardened spring steel “Y” flails (STD) – will mulch up to 75mm
Optional cast steel hammers for smooth finish
Front chain guards – Standard NZ Spec
Double plated wear proof skin
High speed rotor – provides excellent grass cutting finish
CAT II 3pt linkage mounting – Manual bolted offset adjustment
Adjustable skids for height control (STD), optional rear wheels or roller
Counter knives for mulching (STD) – recommended for straw and maize
Professional multi-purpose flail mower recommended for maintaining uncultivated land and green areas
1.4m - 2m Working Widths
40 – 105hp rated
Low Profile Steel Body made from high tensile Swedish steel
Rear opening Adjustable Hood – For discharge in heavy conditions
Rounded anti-snag R/H side body
Freewheel Clutch inside Oil filled Gear Box – 540 rpm
Quality Cog Belt Drive for maximum power transfer
Cast steel Hammer Flails – Robust will mulch wood up to 70mm
High-Speed rotor – provides excellent grass-cutting finish
CAT I 3pt Linkage mounting – Manual VARIABLE Offset Adjustment
Full Width Adjustable Rear roller standard
Fixed internally welded Counter knife ledger plate for extra fine mulching
The pneumatic seed-drill APE has been designed to work in combination with a power harrow in limited spaces: it is complete with an exclusive system for mounting the hopper on the rear roller (of the power harrow) which makes it possible to limit the height even while the implement is lifted off the ground.
Electric console to be placed in the tractor cabin:
– Start and stop of the fan;
– Start and stop of the distributor;
– Graduated potentiometer with scale from 1 to 30;
– Socket 12 V;
– Direct; 5 m. long cable to the seeder
Electric fan 12V
Electric motor 12V for the metering unit
Roller mounted standard with medium grooves (yellow colour)
Metering unit with 8 outlets Ø 25mm
8 pcs. flexible pipes connected with the mobile broadcasters on the levelling bar: it is possible to change the broadcasting width even in relation to the working width of the power harrow